Midea Freestanding Washer/Dryer — MF10ED80B
Support Contact Information
Over the phone support: 01234 567890
Email: service_uk@midea.com
Use the quick links below or scroll down for online support for your product.
Frequently Asked Questions
- Most washer dryers allow you to run each programmes separately, as well as an automatic transition between both.
Please check your instruction manual for compatibility.
If your clothes do not smell nice after a wash, check the following:
- Ensure the drum isn’t being overfilled. If clothes are too crammed then they will not be cleaned correctly.
- Do not over fill the conditioner. The conditioner is released into the drum near the end of the cycle. If there is too much in the drawer it will be released earlier and be washed away.
- Ensure cleaning and maintenance is carried out regularly to remove any grime deposit.
- Ensure the inlet pipe is clean. You can remove this and run some hot water through to check.
If the appliance is noisy, try the following:
- Drain the filter out slowly and check for any blockages. Then clean the filter and refit.
- Check that the paddles inside the drum are not loose.
- Ensure there is a 2cm clearance around the whole appliance.
- Ensure the appliance is on a level surface.
- Check the seal and pockets after the wash in case anything has gotten stuck.
- Ensure the loads are no bigger than ¾ full as the clothes may become bunched up and could cause the noise when trying to complete a spin. Different clothing, such as hoodies, weight more than other items so therefore you may be required to put less in.
If the appliance isn’t draining, try the following steps:
- Drain the filter out slowly and check for any blockages. Then clean the filter and refit.
- Check that the outlet pipe does not have any kinks or bends that could be restricting the water flow.
- Check for any blockages in the outlet pipe that could be preventing the water from draining.
- Try a hot wash to give the internal pipes a good clean.
- Check for any error codes on-screen and refer to your user manual.
If a programme isn’t starting, try the following steps:
- Check the load. The load should be between ½ to ¾ full. Any less and the weight will not be recognised. Over ¾ full and the drum may not move. Different clothing, such as hoodies, weigh more than other items so therefore you may be required to put less in.
- Check that the door has been locked correctly and the programme has been selected.
- Ensure water is entering the appliance. If not, check the inlet pipe and check that the tap underneath the sink is fully open.
- Check to see if a delay timer has been set.
- Check for any error codes on-screen and refer to your user manual.
- Drain the filter out slowly and check for any blockages. Then clean the filter and refit.
- Check that the outlet pipe does not have any kinks or bends that could be restricting the water flow.
- Check for any blockages in the outlet pipe that could be preventing the water from draining.
1 Year Limited Manufacturer Warranty
1 YEAR LIMITED WARRANTY
This warranty is provided to the original purchaser at retail (the “Purchaser” or “you”) by Midea America Corp. (“Midea” or “we”), which warrants all parts of this Product, as described below. Midea warrants this Product to the Purchaser for personal, family or household use. This warranty covers performance and quality issues in materials and workmanship that appear under normal use and maintenance appearing within one year from the date of purchase. This warranty gives you specific rights, and you may also have other rights that vary from state to state.
To register your product warranty please visit https://midea.pacificawarranty.com/welcome

